Parts(23)

Desert Tech SRS Buttpad Assembly, Gen2. Created from durable black polymers and rubber, this gen2 buttpad assembly is an OEM factory original component from Desert Tech. The recoil pad assembly is designed for both the SRS-A2 & SRS-A2 Covert rifle models from Desert Tech chambered in all available calibers including 6.5 Creedmoor, .308 Win, .260 Rem, & .6.5×47 Lapua. This buttpad assembly is installed on the back of the firearm to provide length of pull and recoil mitigation when fired. The assembly includes a 1-1/4″ buttpad with plate and 2 spacers of 1/2″ each for a total LOP of 2-1/4″. Desert Tech rifles and components are proudly made in the USA. Assembly Includes:

• Buttplate w/ Pad – x1
• Recoil Pad Spacer – x2

Models Fit:

• SRS-A2
• SRS-A2 Covert
• SRS-M2

Desert Tech SRS Coated Firing Pin. This firing pin is crafted of a very strong coated stainless steel and is a factory original Desert Tech component. The firing pin is designed for both the SRS-A2 & SRS-A2 Covert Desert Tech rifles chambered in all calibers including 6.5×47 Lapua, .260 Rem, 6.5 Creedmoor, & .308 Win. The firing pin will strike the chambered round when the rifle is fired. Desert Tech rifles and components are proudly made in the USA. Models Fit:

• SRS-A2
• SRS-A2 Covert
• SRS-M2

Desert Tech SRS Ejector Pin. The ejector pin is crafted from strong stainless steel with a black finish and is an OEM factory original component from Desert Tech. The ejector is designed for the SRS-A2 & SRS-A2 Covert Desert Tech rifle models chambered in their available calibers including .260 Rem, .308 Win, 6.5×47 Lapua, & 6.5 Creedmoor. The ejector is found in the face of the bolt head and expels the chambered cartridge when the rifle fires or when the bolt is opened. Long action chambered SRS models require two of these ejectors while short action versions need just one. Desert Tech rifles and components are proudly made in the USA. Models Fit:

• SRS-A2
• SRS-A2 Covert
• SRS-M2

Desert Tech SRS Ejector Roll Pin, M2x14. This strong steel roll pin is durably crafted and is a factory original component from Desert Tech. The roll pin is designed for the SRS-A2 & SRS-A2 Covert Desert Tech rifle models chambered in their available calibers including .308 Win, 6.5×47 Lapua, 6.5 Creedmoor, & .260 Rem. This pin fits inside the bolt to retain either two (long action calibers) or one (short action calibers) ejector pins. Desert Tech rifles and components are proudly made in the USA. Models Fit:

• SRS-A2 Covert
• SRS-A2
• SRS-M2

Desert Tech SRS Ejector Spring. Coiled from quality steel, this ejector spring is a well crafted factory original component from Desert Tech. The ejector spring is designed for both the SRS-A2 & SRS-A2 Covert rifle models from Desert Tech chambered in all calibers including .308 Win, 6.5×47 Lapua, .260 Rem, & 6.5 Creedmoor. The ejector spring is installed through the bolt head and provides proper tension to the ejector(s). The SRS-A2 rifle requires 2 of these springs while the SRS-A2 Covert requires just 1 spring. Desert Tech rifles and components are proudly made in the USA. Models Fit:

• SRS-A2
• SRS-A2 Covert
• SRS-M2

Desert Tech SRS Extractor Detent. Constructed of durable stainless steel, this extractor detent is an OEM factory original component from Desert Tech. The detent is made to fit the SRS-A2 & SRS-A2 Covert Desert Tech rifles chambered in all available calibers including .260 Rem, 6.5 Creedmoor, & .308 Win. Part of the bolt group, the extractor detent interacts with the extractor spring to apply pressure to the extractor for proper function. Desert Tech rifles and components are proudly made in the USA. Models Fit:

• SRS-A2
• SRS-A2 Covert
• SRS-M2

Desert Tech SRS Recoil Pad Spacer, Gen2. Formed from a durable black polymer, this 2nd gen recoil pad spacer is an OEM factory original Desert Tech component. Designed for both SRS-A2 & SRS-A2 Covert rifle models from Desert Tech chambered in all available calibers including .308 Win, .260 Rem, 6.5 Creedmoor, & .6.5×47 Lapua. This recoil pad spacer is installed on the back of the firearm between the stock and recoil pad to provide an adjustment to the length of the pull. Multiple spacers may be added to fit your needs as they simply slide to lock onto each other; this spacer adds an extra 1/2″ to the LOP. Desert Tech rifles and components are proudly made in the USA. Models Fit:

• SRS-A2
• SRS-A2 Covert
• SRS-M2

Desert Tech SRS Striker. This striker is manufactured for the Desert Tech SRS-A2 & SRS-A2Covert rifles chambered in all available calibers including .260 Rem, .308 Win, 6.5×47 Lapua, & 6.5 Creedmoor. Located in the bolt assembly, this right hand striker houses the firing pin and is responsible for striking the firing pin when the rifle is fired. Produced from steel and featuring a black finish, this piece is proudly made in the USA. Models Fit:

• SRS-A2
• SRS-A2 Covert
• SRS-M2